Hello SWEVEN Community. To help you set up your IoT device quickly and avoid extra back-and-forth, here’s a step-by-step guide on how to configure your device directly through Wi-Fi. (This example shows how to change the tank height.)
 Before You Start

• Make sure you are physically close to the device — the device’s Wi-Fi signal is short-range, so you’ll need to be nearby to connect.
• The Wi-Fi password is not public. Please request it from your SWEVEN contact manager before starting the configuration.

 Step 1: Connect to the Device Wi-Fi Network

1. On your phone, open Settings → Wi-Fi.
2. Look for and select the network named:

SWEVENsv343

(your device ID will vary) 3. Enter the password provided by your SWEVEN contact manager.

 Tip: Each device has a unique network name and password — always double-check with your contact if unsure.

 Step 2: Open the Configuration Page

1. Open your phone’s web browser.
2. Type the following address and press enter:

http://192.168.4.1

3. The device’s configuration portal will load.

 Step 3: Update Tank Height

1. In the web form, find the field “Tank Height (m)”.
2. Change the value to your desired height. (Example: 1.93)
3. Tap Save Configuration.

This setting helps the device calculate water levels accurately based on your tank’s dimensions.

Step 4: Verify the Change

1. Refresh the page.
2. Check that the Tank Height (m) field now displays the new value (1.93).
3. You’re done

 Need Help?

If anything looks off or doesn’t save, don’t worry — we’re here to help. You can reach out during the support call, or leave a comment below and our team will follow up.

 That’s it! Your SWEVEN device is now configured with the correct tank settings and ready to start transmitting data.